Product summary and specifications
Comparison with the conventional type
What is a traverse guide
Lineup and specifications
Comparison of efficiency
Concept of product development
Product guide VTR
   
Product summary and specifications
Structure
Comparison with the conventional type
Lineup and specifications
Product guide VTR
   
Product summary and specifications
Principles of Separation/Comparison with the conventional type
V-shape Cascade
Specifications
Product guide VTR
   
Company guide
Department guide
Access map
Information contact
 
 
 
TOKKI LTD.ECO DEPARTMENT
50-5 Nakiri, Kuriya, Shunan, Yamaguchi, Japan 745-0802
TEL 0834-26-1080/FAX 0834-26-1081
2   Comparison with the conventional type
 
 Difficulties with Conventional Type (Open-bath Type)
1

When the operation is started, the strands must be discharged manually from the bath into the rolls at the inlet of the cutter, which may be a dangerous work.

2

If a number of strands are slackened between the bath and the cutter from some reason during the operation, the operation becomes impractical, and as the result, the valuable product must be discharged, which can be a source of producing waste resin.

3

If the strands are cut off from some reason during the operation, they becomes a lump or agglomerate within the bath, making the operation impractical, and as the result, the valuable product must be discharged, which can be a source of producing waste resin. 。

4

The noise level during the operation is so high as 100 dBA.

5 The cutter installation area is large for the throughput.
- Pushing the operation button will show an animation.

  Characteristics of Tokki’s Type (Underwater Type)
1

When the operation is started, the strands are transferred into the internal rolls of the cutter automatically due to the elevation gap and water flow, and started to be cut. By such a mechanism introduced, the operatorユs hands become unnecessary, and the operation is made free from hazards.

2

Even if the strands are cut off from some reason during the operation, the strands are transferred by water flow and started to be cut, and therefore the valuable resources are not wasted

3

Even if a number of strands are slackened, the strands flow down together with the cooling water within the shoot, and cut, and therefore, the operation can take place continuously, and as the result, the valuable resources are not wasted.

4

The noise level during the operation is so low as 85 dBA.

5 The cutter installation area for the throughput is one third of the conventional type.
- Pushing the operation button will show an animation.

 

Copyright 2006 徳機株式会社(TOKKI LTD.) All rights reserved.